Tuesday, February 21, 2012

The Rise Of The Touchscreen DJ

The future is here. DJing on a touchscreen surface is now a reality!


DJ Craig's Matrix Touch Screen

No longer will party goers have to squint to make out the dimly lit outline of an anonymous DJ with his head buried in a computer laptop. A new, colorful, interactive, transparent flat screen display puts the music and DJ front and center where they belong.



This eye catching screen can be viewed from either side, everyone in the room can see the DJ play, apply effects, loop and create virtual song remixes on the fly. It showcases the ART OF THE MIX and provides both audio and visual excitement.



This interactive display also acts as a high tech message board, allowing the DJ to instantly communicate with the entire crowd without interrupting the flow of the music.

With 130 buttons, knobs and sliders, the screen is as beautiful as it is functional, adding the wow factor to your event. The DJ touchscreen may just revolutionize the way DJs work from this point on.

For more information go here: touch screen dj


The Wedding DJ

Tuesday, February 7, 2012

DJ Your Own Wedding!

CNET's Donald Bell really breaks down how to go DJless at your own wedding in this video and corresponding article: 



http://cnettv.cnet.com/use-itunes-dj...-50119370.html

Interestingly, in the lead paragraph he says, "The DJ plays a critical and often misunderstood role in any wedding ceremony. If you can afford a professional, by no means should you use the following tutorial to skimp out. You'll save yourself loads of hassle and be able to enjoy your day with one less concern floating around in your head."

Unless your location provides it, you're still going to need a mixer, amp, speakers, mic, back up system, tripods, audio cables, extension cords, power strips and the time it takes to create your own playlists. You will also need someone to run the system.

More from the article:
"There are dozens of little things that could throw a wrench in the works. Hopefully, practicing things ahead of time will iron out some of the kinks.

Here are some tips and common mistakes, though.

The microphone feedback is unmanageable. As a quick fix, turn the microphone down or switch it off. The root of this problem is usually caused by speaker placement. If the speakers are position behind the person using the microphone, the mic will pick up their projected sound, the speakers will amplify it, the mic will pick it up, the speakers will...you get the point. It's a feedback loop.

To fix the issue, make sure the speakers are facing away from the microphone. There's a tendency to place speakers back against the wall, but they really should be out in front of the microphone, projecting away from the mic and towards the audience.

The music is too quiet. In the setup I've described here there are six volume knobs, and any one of them could be turned down too low. In order, these volume controls are: the volume slider in iTunes, the master volume on your computer, the channel volume on the mixer (typically located near the bottom), the channel gain (typically located next to the audio inputs), the master volume on the mixer, and the volume control on the powered speakers.

The music is distorted. This problem is also typically associated with all of the various volume controls at play. When a volume control is turned up too loud, or there's an imbalance of loud amplification applied to a quiet signal, you can get a noisy or distorted sound.

Nothing should be set at full volume. If the volume meter on your mixer is peaking into the red, you're doing something wrong.

Here are my suggested volume settings: iTunes at 75 percent, your computer at 75 percent, channel volume at 50 percent, the channel gain at 50 percent, speaker volume at 50 percent, and then slowly turn up the mixer's master volume to the appropriate level. That conservative setting should shake off any distortion, but if it's still too quiet with the mixer's master volume at 75 percent, you can try edging up the channel volume and gain to 75 percent and turn up the volume directly on your speakers.

There's no sound at all. Three things need to be turned on: your computer, your mixer, and your powered PA speakers.

Next, run through all of the volume settings outlined above.

Finally, check the audio connections. Is the cable running from your computer connected to the audio output, or did you plug it into the audio input by accident. Is it possible that the mixer has some type of mute button or tape output button enabled? Can you hear sound when you plug headphones into the mixer? Does the microphone work? Try plugging in your iPod or smartphone--does that work? Is it possible that you have a bad cable?"


As you can see, lots of potential headaches here. Bell closes the article by reiterating that those that can afford it should hire a pro.  Without meaning to, this article really demonstrates how much work goes into DJing a wedding.



The Wedding DJ